Dowel SZ-B 18/150

The ETA, Option 1 approved SZ anchor is a high performance push-through anchor system with a triple expanding

special sleeve, which allows very high permissible loads with small axial and edge distances.

The plastic compression ring ensures permanent clamping of the fastening part against the substrate and prevents the anchor from

rotation of the anchor during installation.

Advantages

- very high tensile and shear loads

Application examples

Medium to heavy anchorages in cracked and non-cracked concrete,

e.g. steel supports, railings, machines, scaffolding, brackets.

Drill diameter mm: 12

Dowel length overall mm: 260
Thread: M12

Drill hole depth mm: 245

Required anchoring depth in concrete mm:

Tightening torque dowel Nm: 80

Ø mm / clamping thickness: 18 / 150 mm

packing unit: 1